Marker on Radio
Moderator: Queue Moderator
Marker on Radio
Hello, I bought a HT1000 at a flea Market and it is in great condition but it has "MINE DON"T TOUCH" written on it LOL! Since the housing is in such good shape any ideas for taking it off???
ThE HoLe In OnE mAn
Best thing to try is charcoal lighter fluid. Yes it works.
does minimal or no damage. Major solvent in it is naptha (sic).
The slight oil in it keeps the plastec from crazing ir going white.
put a bit on a papet towel and rub briskly on the marker stain.
Lighter fuel is the same thing almost but a bit purer, and harsher.
Phrawg
does minimal or no damage. Major solvent in it is naptha (sic).
The slight oil in it keeps the plastec from crazing ir going white.
put a bit on a papet towel and rub briskly on the marker stain.
Lighter fuel is the same thing almost but a bit purer, and harsher.
Phrawg
BBbzzzzz... ZAP.. GULP !!! ahhhh GOOD fly !
-
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 727
- Joined: Sat Oct 06, 2001 4:00 pm
- jedi_saber
- Batboard $upporter
- Posts: 573
- Joined: Sat Jun 08, 2002 1:09 pm
markings
ECG makes an ink and marker remover. I use it to remove most any writing off of prison radios. Part # is RX4000-6 for the six ounce can. Available at most electronic wholesale places-RRRobby
Remover
I do not think this will work on paint pen, but works on marker, ball point pen, etc.
Women's aerosol hair spray! Do not know what is in it that works so well, but it takes it off quick, dries before it has a chance to attack the plastic or paint.
I used this on T1600s and Centracom consoles where brainless dispatchers had nothing better to do than write on the equipment. Believe it or not, it was in the contract to remove the markings! Also works on adhesive tape residue
and gives the part a nice, silky appearance.
Fred
KE4RBT
Women's aerosol hair spray! Do not know what is in it that works so well, but it takes it off quick, dries before it has a chance to attack the plastic or paint.
I used this on T1600s and Centracom consoles where brainless dispatchers had nothing better to do than write on the equipment. Believe it or not, it was in the contract to remove the markings! Also works on adhesive tape residue
and gives the part a nice, silky appearance.
Fred
KE4RBT
- Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Messing up radio cases, etc.
Best one I ever saw was in Ohio when I was in college many years ago. The local power company's kerosene lanterns had STAMPED into their tank bases, "STOLEN FROM THE DAYTON POWER AND LIGHT CO." But people still stole them anyway.
And there is still a special place in hell for anyone who does freehand engraving on a plastic radio case.
And there is still a special place in hell for anyone who does freehand engraving on a plastic radio case.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
Re: Messing up radio cases, etc.
AmenAnd there is still a special place in hell for anyone who does freehand engraving on a plastic radio case.
Duct tape is like the force, it has a dark side and a light side and it holds the universe together.
"I Reject Your Reality And Substitute My Own!" - Adam Savage
"I Reject Your Reality And Substitute My Own!" - Adam Savage