System Saber III
Moderator: Queue Moderator
- Radio Intelligence Agency
- Posts: 122
- Joined: Sat Jan 11, 2003 9:36 am
System Saber III
I just noticed that my SSIII wouldn´t send ack when checked by the command console on the repeater channel which has a hang time. On a simplex frq it goes smooth. How come?
Second: all my SSIII chare the same problem unmuting in analog. They need a sec or two every time before they will finally unmute.
Third: when they scan they go crazy giving me white noise only how come?
Fourth: one of them seems to give me hell when disabled and enabled. Could there be a thin red line I´ve crossed somewhere during programing?
Hope there´s a System guro out there, thanks.
Second: all my SSIII chare the same problem unmuting in analog. They need a sec or two every time before they will finally unmute.
Third: when they scan they go crazy giving me white noise only how come?
Fourth: one of them seems to give me hell when disabled and enabled. Could there be a thin red line I´ve crossed somewhere during programing?
Hope there´s a System guro out there, thanks.
***************************************
Keep it under your hat.
Man´s got to know his limitations.
Keep it under your hat.
Man´s got to know his limitations.
What is/are the exact commands you are sending through the console?
QC-II, MDC, Sel-Call.....??
How are your mute/unmute timers set...value?
Do you use status messages or remote monitor on your system?
Secure?
Do you or have you changed the MDC variable unit ID?
I need a little more in-depth information in order to help.
I'll be happy to work with you in real time if you have Yahoo messenger, my IM ID is: AEC9823, send a request and I'll authorize you and we can work the problem out as you are working onn it.
I'll have Yahoo active and hope to see your request.
QC-II, MDC, Sel-Call.....??
How are your mute/unmute timers set...value?
Do you use status messages or remote monitor on your system?
Secure?
Do you or have you changed the MDC variable unit ID?
I need a little more in-depth information in order to help.
I'll be happy to work with you in real time if you have Yahoo messenger, my IM ID is: AEC9823, send a request and I'll authorize you and we can work the problem out as you are working onn it.
I'll have Yahoo active and hope to see your request.
- Radio Intelligence Agency
- Posts: 122
- Joined: Sat Jan 11, 2003 9:36 am
- Radio Intelligence Agency
- Posts: 122
- Joined: Sat Jan 11, 2003 9:36 am
Okay, that sounds interesting. But the saber dosn´t seem to have this problem switching from clear to secure. I wonder if there´s something more to it? I´ve experienced the problem both with single and multikey modules.But only with the system sabers.
***************************************
Keep it under your hat.
Man´s got to know his limitations.
Keep it under your hat.
Man´s got to know his limitations.
- Radio Intelligence Agency
- Posts: 122
- Joined: Sat Jan 11, 2003 9:36 am
I would very much like to hear if anyone ever found a way around this irritating problem.
Funny how the M radioes have their differences but I havn´t found the final package yet
By the way where did a "WHCA" radio come from anyway?
Funny how the M radioes have their differences but I havn´t found the final package yet
By the way where did a "WHCA" radio come from anyway?
***************************************
Keep it under your hat.
Man´s got to know his limitations.
Keep it under your hat.
Man´s got to know his limitations.
- FireCpt809
- Posts: 1846
- Joined: Sat Jan 19, 2002 4:00 pm
- What radios do you own?: Alot..
- Radio Intelligence Agency
- Posts: 122
- Joined: Sat Jan 11, 2003 9:36 am
- Radio Intelligence Agency
- Posts: 122
- Joined: Sat Jan 11, 2003 9:36 am