Moto wireline control board

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
jistabout
Posts: 159
Joined: Wed Sep 01, 2004 8:22 am

Moto wireline control board

Post by jistabout »

Hi everyone!

I'm looking for information on a certain Motorola wireline control option board. I found 2 numbers printed on the solder side of the board: TRN6744A (or possibly TKN6744A) and TCN1222A.

This board is inside a UHF Mitrek consolette base, and I have the matching desktop control unit also.

What I want to do is to remove this wireline board from the consolette and install it in an existing repeater which lives in my garage. I then will run a control line from house to garage and hopefully be able to talk on and control said repeater from the house using the desktop console. Just like the old days :).

Any help/thoughts are very much appreciated. Thank you alot.....
Aww screw it. I didn't wanna fool with it anymore anyhow.
Babylon 5
Posts: 6
Joined: Wed Nov 17, 2004 11:50 am

Re: Moto wireline control board

Post by Babylon 5 »

You have a TRN6744A Tone Remote Control Board 2 Freq. PL squelch.

Do you require pinouts, or the entire manual section?
It always looks darkest just before it goes completely black...
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”