Got a few questions on the motorola base mic.
1 I have a HMN1088A that I want to wire for a maxtrac. Is it possible?
2 We got a few guys in town here who are interested in hooking theese things up to radios that are not motorolas. One guy has an Icom V8000 and the other guy has a Yaesu FT-1802M. Can this be done?
Base mic Qs
Moderator: Queue Moderator
Base mic Qs
The BEST money you will EVER spend on a radio system is on the ANTENNA and FEEDLINE!
-
- New User
- Posts: 1
- Joined: Wed Feb 20, 2008 9:28 am
Re: Base mic Qs
I do not know for sure, but I have heard that /\/\ uses non industry standard inpedences for their microphones to discourage aftermarket accessories. So it might not work.
Re: Base mic Qs
Welcome to the forum! I figured out my first question so thats one down anyway.
The BEST money you will EVER spend on a radio system is on the ANTENNA and FEEDLINE!
Re: Base mic Qs
I don't have info on that specific mic but most Motorola mics use an electret element and require proper bias on the mic line for the element and/or an internal preamp. They are not a good choice to try to adapt to other radios.
-
- Posts: 533
- Joined: Mon Aug 23, 2004 7:30 pm
- What radios do you own?: Kenwood, Yaesu, ICOM, Motorola
Re: Base mic Qs
I've interfaced an older Micor style Mobile and Desk microphone to my ICOM ham transceiver. They do require a bias voltage on the Motorola microphones which you'll need to determine if your ham transceiver can provide. The Motorola microphones use a 600 Ohm impedence which should work with most VHF and UHF ham transceivers. If you plan to use a Motorola microphone for a H.F. ham transceiver, you will be required to place RF Chokes or Coils within the Desk microphone to prevent the lower frequency RF from getting back into the ham radio transceiver.
Re: Base mic Qs
Thanks for all the info!
The BEST money you will EVER spend on a radio system is on the ANTENNA and FEEDLINE!