Maxtrac part number for internal speaker cable?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Norman
New User
Posts: 58
Joined: Sat Nov 15, 2008 9:44 pm

Maxtrac part number for internal speaker cable?

Post by Norman »

Hi. Can someone please tell me the part number for the cable which connects the internal speaker to a Maxtrac logic board? I bought a used Maxtrac but need to lug around the external speaker until I patch then internal speaker to the logic board (the solder lugs are pretty clean as if the speaker was replaced and someone left out the cable).

Thanks -- Norman
W8RW
Posts: 68
Joined: Thu May 06, 2004 9:08 am

Re: Maxtrac part number for internal speaker cable?

Post by W8RW »

If you just need the two conductor cable that plugs into the board and solders to the speaker, PM me with your mailing address. My part number for it is: junque-box.
Norman
New User
Posts: 58
Joined: Sat Nov 15, 2008 9:44 pm

Re: Maxtrac part number for internal speaker cable?

Post by Norman »

Thank you sir! PM in your mailbox.

--Norman
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”