Alert Monitor Relay

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
Two Tone
Posts: 103
Joined: Wed Mar 31, 2004 8:47 am

Alert Monitor Relay

Post by Two Tone »

I have an older Moto Alert Monitor (one of the silver ones) and I see there is a relay port on the back. Does anyone know the output voltage for this or have any other information on it? Any help would be appreciated! Thanks!
Top
User avatar
Two Tone
Posts: 103
Joined: Wed Mar 31, 2004 8:47 am

Re: Alert Monitor Relay

Post by Two Tone »

Anyone? Maybe just what the voltage is?
Top
User avatar
Vern
Posts: 81
Joined: Thu Sep 06, 2001 4:00 pm

Re: Alert Monitor Relay

Post by Vern »

I assume you're looking at the two-prong plug on the rear? If so, this was connected to an internal relay. The contacts closed upon an alarm. Maximum current is 2 amps @117 volts continuous and 5 amps surge. The relay kit was a NLN6633A. IIRC the relay was a square metal can beside the power transformer.


Vern
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Alert Monitor Relay

Post by Will »

Some Alert Monitor radios had provision for the external relay. It has been a looong time since I worked on them at Motorola.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”