Howdy,
I'm wondering what is available in the way of remote mount UHF radio. Looking for minimum 16 Channel 450-470 (better if it goes into ham band too). I don't need anything fancy or more than 25watts for this requirement. What models might fit the bill?
Remote mount UHF conventional options?
Moderator: Queue Moderator
Re: Remote mount UHF conventional options?
CDM
Older maxtracs if you can find the remote kit.
CDM is current product and you have a myriad of options for power, amount of channels, display, etc.
Older maxtracs if you can find the remote kit.
CDM is current product and you have a myriad of options for power, amount of channels, display, etc.
Re: Remote mount UHF conventional options?
Being that this is a Moto board I would guess that you are asking about them but if your open to others..
I have a Kenwood TK-8180 remote mount that is great and in the past have used the Tk-690/790/890 was will. I like both over the CDM remote. I wish /\/\ would make their CM300 in a remote but there not going to.
I have a Kenwood TK-8180 remote mount that is great and in the past have used the Tk-690/790/890 was will. I like both over the CDM remote. I wish /\/\ would make their CM300 in a remote but there not going to.
Re: Remote mount UHF conventional options?
You forgot XTL2500s, PM1500s, XTL5000s, TK-5810s, and a number of Vertex, Standard, and Icom radios also.
Re: Remote mount UHF conventional options?
Thanks guys,
Not 100% familiar with some of these, so I'll do some reading and see what might fit the bill.
Thanks!
Not 100% familiar with some of these, so I'll do some reading and see what might fit the bill.
Thanks!
Re: Remote mount UHF conventional options?
CDM remotes are a pain, and it doesn't sound like you need an XTL or TK-5810. Look at the TK-8180K... 30 watts, 512 channels, remote mount kit is cheap, and you can buy the whole thing brand new for sub-$600. If you want P25, they have an identical radio with P25 added in for about $500 more.sailor wrote:Howdy,
I'm wondering what is available in the way of remote mount UHF radio. Looking for minimum 16 Channel 450-470 (better if it goes into ham band too). I don't need anything fancy or more than 25watts for this requirement. What models might fit the bill?