MX300 Rubber Replacement
Moderator: Queue Moderator
- njh621
- 1 Warning for RSS/CPS Wanted/For Sale/Links
- Posts: 38
- Joined: Thu May 27, 2004 11:44 am
- What radios do you own?: MTX810, HT600, MX300 series
MX300 Rubber Replacement
Need help on replacing two rubber parts on a few of my MX300 series radios. First off, how do I go about replacing the rubber PTT button? Second, any idea how to replace the round rubber piece in the center of the accessory connector? On nearly all of my radios, that center rubber piece has turned into an oily rubber gunk. Any idea where I can find replacement parts? Thanks!
-Nick Halliday
Titan II ICBM Historian & Electrical Engineering Student
"Thank you SKYBIRD, release ACK/CALL."
Titan II ICBM Historian & Electrical Engineering Student
"Thank you SKYBIRD, release ACK/CALL."
Re: MX300 Rubber Replacement
You could find another frame that has the parts needed or a complete frame.
- MotoFAN
- Posts: 1054
- Joined: Thu Jun 28, 2007 6:46 am
- What radios do you own?: Approx. 50: Moto & Kenwood
Re: MX300 Rubber Replacement
Rubber PTT is still available as part. Something about $20 for 5 pk.
I am biggest fan of XTS2500 and ASTRO Digital Saber.
Re: MX300 Rubber Replacement
Rubber PTT pries off
Fowler
Fowler
Q: Does this unit come with a speaker?
A: hello yes its in the radio thanks
A: hello yes its in the radio thanks
Re: MX300 Rubber Replacement
Depot/parts still supports these?MotoFAN wrote:Rubber PTT is still available as part. Something about $20 for 5 pk.
Re: MX300 Rubber Replacement
It wouldn't surprise me the basic little things are still available. There are a *LOT* of these things still in service in various places.
I would question the quality of the parts though, how long have they been sitting on M's shelf?
I would question the quality of the parts though, how long have they been sitting on M's shelf?
- njh621
- 1 Warning for RSS/CPS Wanted/For Sale/Links
- Posts: 38
- Joined: Thu May 27, 2004 11:44 am
- What radios do you own?: MTX810, HT600, MX300 series
Re: MX300 Rubber Replacement
Glad to see replacement parts are still available. Exactly how do these PTT buttons pry off the MX300? I tried popping one off with a very, very tiny flat screw driver and ended up breaking it (DOH!). As far as the little rubber disc inside the accessory connector recess on the radio, apparently it covers up some kind of pin that isn't used(?). I don't think the absence of the disc should cause any significant concern, I was just worried about water getting inside through that opening.
-Nick Halliday
Titan II ICBM Historian & Electrical Engineering Student
"Thank you SKYBIRD, release ACK/CALL."
Titan II ICBM Historian & Electrical Engineering Student
"Thank you SKYBIRD, release ACK/CALL."
-
- Posts: 1648
- Joined: Wed Apr 02, 2003 10:35 am
- What radios do you own?: APX XTS XTL TRBO 900MHZ
Re: MX300 Rubber Replacement
I think that pin is used to enable the usage of the shoulder mike. GARY N4KVE