Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Need 10 pin coupler part number

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

User avatar
arlojanis
Posts: 987
Joined: Mon Jan 28, 2002 4:00 pm

Need 10 pin coupler part number

Postby arlojanis » Sat Aug 20, 2011 6:37 am

I need the part number and supplier for a 10 pin modular coupler with female sockets and for 8 and 10 pin modular Y connectors with male plug and 2 female sockets. What are the RJ numbers for 8 pins and for 10 pins?
Last edited by arlojanis on Sun Aug 21, 2011 12:29 pm, edited 1 time in total.
"The world runs on radio."

Kingston
New User
Posts: 2
Joined: Sat Aug 20, 2011 10:31 pm

Re: Need 10 pin coupler part number

Postby Kingston » Sat Aug 20, 2011 10:36 pm

check mouser.com or digikey.com

User avatar
arlojanis
Posts: 987
Joined: Mon Jan 28, 2002 4:00 pm

Re: Need 10 pin coupler part number

Postby arlojanis » Sun Aug 21, 2011 12:13 pm

I had a Mouser tech do a search and he could not locate anything.
"The world runs on radio."

Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: Need 10 pin coupler part number

Postby Al » Sun Aug 21, 2011 1:01 pm

Arlo, I believe the 8 pin modular is an RJ45 and the 10 pin is an RJ50. I've never seen a beast such as you're looking for, only female to female 10 pin RJ50 couplers.

Garyf629
Posts: 169
Joined: Thu Oct 30, 2003 5:45 pm

Re: Need 10 pin coupler part number

Postby Garyf629 » Sun Aug 21, 2011 4:51 pm

You can get the 8 pin RJ-45 from TigerDirect or NewEgg Computer suppliers. These are for a very specific purpose, NOT for splitting an eithernet connection. I hope that you are not trying to connect 2 CDM control heads to one radio, or 2 CDM radios to one control head, IT WILL NOT WORK. If your lucky no damage will be done, but you could take out both processors.

The 10 pin connector is an RJ-50, it is used in the telephone industry for ISDN lines.


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests