Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

GR1225 and I20R controller

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Jay
Batboard $upporter
Posts: 723
Joined: Wed Sep 05, 2001 4:00 pm

GR1225 and I20R controller

Postby Jay » Thu Oct 06, 2011 7:04 am

I have a GR1225 that i want to retrofit with an I20R controller. The I20R was pulled in working condition from a GR300 repeater. Obviously, I need a different cable to interface I20R with the 1225 and will have to make some programming changes to both devices. My questions are:

1. Does anyone have the part # (or pinout) of the I20R to GR1225 cable?
2. Does anyone know what programming changes need to be made to the GR1225 and I20R to make this work successfully? The I20R manual really does not cover this situation, and I don't have a GR1225 manual.

Thanks in advance,
Jay

Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: GR1225 and I20R controller

Postby Will » Thu Oct 06, 2011 12:27 pm

What you need is the pinouts for the R1225 radio that is used in the GR1225.

Some of the info is in the GR1225 manual too.

One question, what does the I20R do that you need on the GR1225? Then I can look up the pinouts needed.

Jay
Batboard $upporter
Posts: 723
Joined: Wed Sep 05, 2001 4:00 pm

Re: GR1225 and I20R controller

Postby Jay » Thu Oct 06, 2011 2:16 pm

The I20R is a multi PL controller. Yes, I believe that the GR1225 manual spells out this exact situation, I just don't have the manual. Thanks for any additional details.

Jay


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests