Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

MC2500 tone remote failure troubleshooting

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Posts: 122
Joined: Fri Sep 07, 2001 4:00 pm

MC2500 tone remote failure troubleshooting

Postby maxjam » Thu Dec 25, 2014 2:23 pm

I took a chance on 2 mc2500 units. One powers up and works great, the other just lights up and you can hear the relay pull in. After verifying the voltages were good, I swapped the bottom base with the working unit. The problem follows the top. The buttons don't light and nothing shows on the display so it appears that it isn't booting. Has somebody troubleshot a similar issue with the MC2500?

At least one is working.. sure is nice to have only 1 remote on the desk for my Cisco tone remote project!


Return to “Base Stations, Repeaters, General Infrastructure”

Who is online

Users browsing this forum: No registered users and 1 guest