MIP 5000 No RX Audio

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
KennB
Posts: 10
Joined: Wed Sep 10, 2003 6:01 pm

MIP 5000 No RX Audio

Post by KennB »

Anyone ever have an issue getting RX audio to work on the console ? I have TX audio but for the life of me I can not get either select or unselect to work. I've tried another computer, hooking up a gateway directly with a crossover cable, been over the programming a million times, but must be missing something stupid. The speakers work on the computer, as far as they make the default Windows sounds. The console indicates it is getting the receive signal as the VU bars move but no sound from speakers..Thanks

Update: It started working finally, not exactly sure what the issue was but suspect it to do with the gateway database getting uploaded after a change ... Got another one to put together so will see if the same thing comes up..
Last edited by KennB on Sun Feb 01, 2015 6:49 am, edited 1 time in total.
Top
celltech25
Posts: 509
Joined: Fri Apr 29, 2005 3:54 am

Re: MIP 5000 No RX Audio

Post by celltech25 »

did you setup the jackbox in control panel ?
Top
akash1
Posts: 25
Joined: Tue Jun 27, 2006 3:59 pm

Re: MIP 5000 No RX Audio

Post by akash1 »

did you check the mip 5000 control panel setting for audio output device ?
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”