Page 1 of 1
Quantar to Astro Tac Pinouts
Posted: Fri Jan 27, 2017 12:29 am
by RadioPilot
Anyone know the correct pinouts for RJ 45 to RJ 45 from V24 port 1 of Quantar to port 1 of an AstroTac Comparator. Also there are dip switches on the wireline card. Do those have to be configured a different way? Trying to link multiple sites together.
Re: Quantar to Astro Tac Pinouts
Posted: Fri Jan 27, 2017 12:49 pm
by turtle9832
you got the manual?
If not, PM your email to me and ill send it over.
Do you have your links set up?
Where are you located?
Re: Quantar to Astro Tac Pinouts
Posted: Sun Mar 05, 2017 1:09 pm
by chartofmaryland
The cable between the units needs to be a V.24 null
This is just like a crossover cable for network but follows the V.24 pins instead.
TX 2 RX
RX 2 TX
TXCLK 2 RXCLK
RXCLK 2 TXCLK
CTS 2 RTS
GND 2 GND
Cable distance is limited to 52' max
You will need to grab the page from repeater builder or the manual for the V.24 daughter card with the wireline card to follow along with the dip switch configuration for local and microwave or remote. S101 on both devices
Once you do this, you need to program the ports for internal timing and you should have a link
CoM