Vertex VXR-7000 Repeater

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
anniegirl
New User
Posts: 25
Joined: Sat Feb 27, 2016 10:46 pm

Vertex VXR-7000 Repeater

Post by anniegirl »

Looking for someone with Tech Experience with these. I have 5 of these in UHF. I only know there are several versions because I have replaced a few PA transistors. I prefer the 2 PA board types only because simple to replace the AU93 and capacitor.
1. How is an alignment done when the RX and TX board is covered with the control board is on top?
2. I have a nagging condition with one of them. As soon as it is powered on the TX board transmits a signal and all radios mobiles, portables receive lights are flashing indicating a receive. Only one repeater does this so it must be a problem but what needs to be replaced? A earlier post suggested an ocilator crystal?
anniegirl
New User
Posts: 25
Joined: Sat Feb 27, 2016 10:46 pm

Re: Vertex VXR-7000 Repeater

Post by anniegirl »

Help...
Advise..
Needed
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”