In MCD 5000 CT (version 2.3) when I click on "Define GU IP" and enter login credentials it ends up with error message “No response from 10.0.0.1, please check connection to GU.”
I can ping RGU/Deskset on 10.0.0.1. I have SFTP access to it and can communicate with RGU/Deskset via MMI/Local O&M in Putty.
Any ideas?
MCD 5000 cannot define GU IP
Moderator: Queue Moderator
-
proffkursk
- New User
- Posts: 2
- Joined: Mon Sep 24, 2018 6:38 pm
Re: MCD 5000 cannot define GU IP
Are you interfacing to it via the 'internal LAN' port?
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
-
techtonics
- Posts: 84
- Joined: Wed Jun 27, 2007 4:47 am
Re: MCD 5000 cannot define GU IP
Depends on the version of the RGU/Deskset. If it is version 1.0 you cannot talk to it with version 2.3.
I just deployed an additional 20 desksets and had to install an older version CT in order to set the IPs and firmware update.
I just deployed an additional 20 desksets and had to install an older version CT in order to set the IPs and firmware update.
-
proffkursk
- New User
- Posts: 2
- Joined: Mon Sep 24, 2018 6:38 pm
Re: MCD 5000 cannot define GU IP
Thanks all! I found where the problem was. A standalone (initial) version of CT was not installed, but an upgrade version. Once I installed everything in order, it started talking to RGU/Desksets.