MTR2000 & MRTI2000 Issues

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
A911Pro
New User
Posts: 3
Joined: Sun Aug 08, 2010 6:49 am

MTR2000 & MRTI2000 Issues

Post by A911Pro »

I have run into a strange problem when interfacing a UHF MTR2000 to a MRTI2000 Interconnect. The system is using the standard MOT/Gai-Tronics interface cable from the MRTI connector on the MTR to the MRTI.

With the station configured as a base station everything works as it should with the MRTI. When changing the station config to repeater, (no other changes) and attempting to hang-up a previously connected call by sending a DTMF # the station will perform a reset and leave the MRTI in a hung condition requiring a power-cycle to reset.

Have tried this same setup using 2 different MTR's and 2 different MRTI's with the same result, so I can't rule out one or the other as the problem.

Anyone have any ideas on this issue?

Thanks,
Don
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”