Quantar 2nd V.24 Port
Moderator: Queue Moderator
-
mutantblue
- New User
- Posts: 8
- Joined: Wed Feb 27, 2008 3:03 pm
Quantar 2nd V.24 Port
On a Quantar with a V.24 daughter card, is it possible to use Port 2? I realize that an 8-Wire WIB is needed to interface with the second port circuitry of the daughterboard, but even with the 8-Wire board, I haven't been able to utilize Port 2. Is there any way around this, or is Port 2 only useable on an ASTROTac Comparator?
Re: Quantar 2nd V.24 Port
Its only used on the comparator board.
-
mutantblue
- New User
- Posts: 8
- Joined: Wed Feb 27, 2008 3:03 pm
Re: Quantar 2nd V.24 Port
Thanks Byron. That's what I'd come to believe. I first found that a 4-Wire Wireline board didn't pick-up the hardware interfaces. I then proceeded to get an 8-Wire board that did interface to the second port on the V.24 board, but didn't see anywhere in the RSS that would allow it's use. So much for my grand scheme.