Building a 1CH repeater

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
User avatar
Posts: 151
Joined: Thu Mar 01, 2007 12:09 am

Building a 1CH repeater

Post by themedic66 »

I would like to build a small, 1 ch repeater(moto preferably). How would I do this? Is there a website with step-by-step instructions similar to this site:

Thanks in advance!!
"It's all in a days' work"--LAPD/LAFD
User avatar
Posts: 881
Joined: Mon Apr 15, 2002 7:15 am

Re: Building a 1CH repeater

Post by txshooter »

Preston's site is good jumping off point for you although it is very specific to the ICOM radios. A common Motorola repeater would be 2 GM300's hooked together with a Motorola R.I.C.K. or a generic repeater interface which can be commonly found on eBay for less than $10.00.

Another good site for repeater information is there is probably more information on that site than you will ever be able to use.
Scott B.
"Never argue with seven men when you are carrying a six shooter..."
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”