diu 3000 v.24 to quantro (help)

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
RTESTP25
New User
Posts: 24
Joined: Mon Jul 16, 2007 12:00 pm

diu 3000 v.24 to quantro (help)

Post by RTESTP25 »

Connected V.24 board to wireline and made cable to connect diu 3000.Diu 3000 transmits imbe ok but does not decode imbe receive.The rd line on v.24 shows clock pulses and does not change when receiving imbe.I tried v.24 card on a quantar with same results.The quantro is ver. 20 and quantar is ver 16.I do not have information on dip switches on v.24 card and now switch 1 is (on) on active port.V,24 light is also solid on quantro when diu is connected.I tried several configs on wireline with same results.Diu shows active rx light on analog only.Repeater is mixed mode.
RTESTP25
New User
Posts: 24
Joined: Mon Jul 16, 2007 12:00 pm

Re: diu 3000 v.24 to quantro (help)

Post by RTESTP25 »

I found problem looking at wireline configuration.The securenet/astro to wireline was disabled.changed to enable and Diu3000 works great on tx/rx now.
f1shs
Posts: 26
Joined: Wed Jul 12, 2006 8:57 am

Re: diu 3000 v.24 to quantro (help)

Post by f1shs »

Hi, just a question : Do you have cable schema to connect V24 wireline on Quantar to DIU3000? Maybe cable reference ?
User avatar
515
Batboard $upporter
Posts: 297
Joined: Wed Sep 12, 2001 4:00 pm

Re: diu 3000 v.24 to quantro (help)

Post by 515 »

I posted the cable pinout to go from the DIU's COMM connector (DB-25) to the Quantar here:
http://batboard.batlabs.com/viewtopic.p ... 99#p244499
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”