Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Kent County, Michigan fire paging tones Programing M 5

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
Lefty
New User
Posts: 1
Joined: Sun Sep 10, 2017 7:56 am
What radios do you own?: IC9100, minitor V

Kent County, Michigan fire paging tones Programing M 5

Postby Lefty » Sun Sep 10, 2017 12:21 pm

I have the tone information for my local fire department and would like to program it into my Minitor 5 Pager, but the tones do not line up with any of the standards supported formats available including user option
My Uniden scanner decodes Grandville as 882.9 & 430.7 and consistently alerts on these tones. Any advice would be greatly appreciated Jeff W8IP.
Top
Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: Kent County, Michigan fire paging tones Programing M 5

Postby Al » Wed Sep 13, 2017 5:48 am

The user format will let you enter your A & B tones. They won't show up as exactly the frequencies that you entered, but the Min V will alert OK. As long as the displayed tones are within 1.5% of what you entered everything will work.
Top
Post Reply

Return to “Motorola Digital and Voice Paging”

Who is online

Users browsing this forum: No registered users and 1 guest