Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Saber III / MX3000 - scan/nuisance delete/power toggle??

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

g8tzl2004
Posts: 1125
Joined: Wed Sep 08, 2004 10:13 am

Saber III / MX3000 - scan/nuisance delete/power toggle??

Postby g8tzl2004 » Sun Jun 17, 2012 1:18 pm

Anybody know if you can program a front/side key on a Saber III for scan nuisance delete and high/low power toggle?

I've checked the archive but I'm still not sure if you can do the above directly from a key...maybe you need to do it via the Menu..so deleting a nuisance channel might involve a series of key presses?

Thanks

User avatar
FireCpt809
Posts: 1830
Joined: Sat Jan 19, 2002 4:00 pm
What radios do you own?: Alot..

Re: Saber III / MX3000 - scan/nuisance delete/power toggle??

Postby FireCpt809 » Sun Jun 17, 2012 3:04 pm

Standard sabers No, systems sabers had an option for nuisance delete but not Hi/lo

g8tzl2004
Posts: 1125
Joined: Wed Sep 08, 2004 10:13 am

Re: Saber III / MX3000 - scan/nuisance delete/power toggle??

Postby g8tzl2004 » Sun Jun 17, 2012 4:01 pm

Just so I'm clear, a standard Saber III CAN do nuisance delete but NOT via a side/front key? Or can a Saber III not do nuisance delete at all?

User avatar
N6LAU
Posts: 382
Joined: Mon Apr 14, 2008 12:42 am
What radios do you own?: Talkabout-250 w/ P25 Phase 2

Re: Saber III / MX3000 - scan/nuisance delete/power toggle??

Postby N6LAU » Mon Jun 18, 2012 12:40 am

Let me mess around with my Saber and see if I can verify the nuisance delete possibility. I do know that the TX power is NOT selectable via a button or menu on the standard Saber, it is set up in the personality or mode in the RSS and is stuck at the chosen level on a per channel basis.
Joe - N6LAU

User avatar
N6LAU
Posts: 382
Joined: Mon Apr 14, 2008 12:42 am
What radios do you own?: Talkabout-250 w/ P25 Phase 2

Re: Saber III / MX3000 - scan/nuisance delete/power toggle??

Postby N6LAU » Fri Jun 29, 2012 8:53 am

I haven't physically verified this yet but going off of memory if the standard Saber is at least a Model 2 or 3, while the radio is scanning if you press the far right orange button on the face ("enter" I believe) while landed on a active channel it will temporarily remove it from the scan list until scan is turned off then on again.
Joe - N6LAU

g8tzl2004
Posts: 1125
Joined: Wed Sep 08, 2004 10:13 am

Re: Saber III / MX3000 - scan/nuisance delete/power toggle??

Postby g8tzl2004 » Fri Jun 29, 2012 9:23 am

Thanks Joe.

Its good that you can do nuisance delete which is a very useful feature.I've not done it yet but I have been reading up and I think you also need to initially enable nuisance delete in RSS together with enabling the various scan options.


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 2 guests