Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

HT1250

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

fde302
Posts: 24
Joined: Thu Feb 08, 2007 10:26 am

HT1250

Postby fde302 » Fri Oct 05, 2012 9:04 am

I am trying to program a ht 1250 but keep getting the enter password when trying to read or write to it. This is a second hand radio so I don't know thw password. There was a post on this a while back but I am unable to find it Any help is greatly appreciated. Thanks again.

Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: HT1250

Postby Al » Fri Oct 05, 2012 8:02 pm

If you know the CPS version that you're using and are comfortable with hex editing a value or two in the .exe file, do a search on here for 'password bypass' and you'll likely find exactly what you're looking for...the address to change with the hex editor varies somewhat between versions of the CPS, but at least one post has general instructions which would apply to any version of the Waris CPS.
Or (second method which clears the password) is to check the firmware version curently installed in the HT. If you have newer firmware available and the flash adapter to let you update the F/W, doing the update will clear the previous password to blanks.

User avatar
EindhovenOne
Posts: 143
Joined: Mon Nov 03, 2008 2:13 pm
What radios do you own?: APX4K, XTS5K, 2500, XPR7550

Re: HT1250

Postby EindhovenOne » Sat Oct 06, 2012 1:34 pm

If you don't need to save any of the codeplug data that is currently in the radio, I do have the factory tool that resets the codeplug to default. I would be willing to handle this for you at no cost and you just cover the shipping both ways. It is the eaiest and safest alternative to the hex editing if you aren't comfortable with that type of modification. Let me know via PM and we will work out the details. -E
Facta, Non Verba. Saepe Expertus, Semper Fidelis, Fratres Aeterni.

User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Re: HT1250

Postby HLA » Wed Oct 10, 2012 3:48 pm

if you bought it off the bay write back who you got it from and ask them what the password is. If they don't know it i'd ask questions on where they got it from. but where are you located, most of us can get around that pretty easy and can tell you where the radio came from by looking at it's programming
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 1 guest