Motorola CDM-1250 / MDC-1200
Moderator: Queue Moderator
Motorola CDM-1250 / MDC-1200
If this question has been asked before I apologize but. I own a CDM 1250 it's programmed for several different freq. I'm a volunteer firefighter this is what the radio is for. The county's fire band runs on 154.385. The county isn't digital but. My question is, I want to have the MDC-1200 key off tone put in my 1250. Is that possible or is that not possible?
-
SteveC0625
- Posts: 467
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: Motorola CDM-1250 / MDC-1200
Please explain what you want to do a bit better. I am not sure I understand and I suspect others don't either.Iplayerxs wrote:If this question has been asked before I apologize but. I own a CDM 1250 it's programmed for several different freq. I'm a volunteer firefighter this is what the radio is for. The county's fire band runs on 154.385. The county isn't digital but. My question is, I want to have the MDC-1200 key off tone put in my 1250. Is that possible or is that not possible?
-
Thomas
- Posts: 71
- Joined: Mon Oct 20, 2008 5:35 pm
- What radios do you own?: MCS2K,CDM1250,XTS3000,XTL2500
Re: Motorola CDM-1250 / MDC-1200
I suspect that you just want to enable MDC1200 on the certain channels in the radio. In CPS under MDC system you need to setup an MDC system to your needs then strap that system to the conventional personality using the signaling tab.