APX 7500 J2 connentor

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
mcmichaeldh
New User
Posts: 1
Joined: Wed Jun 01, 2011 10:54 am

APX 7500 J2 connentor

Post by mcmichaeldh »

Has anyone been able to control the APX going thru the J2 connector on the back of the radio? Using the Serial Bus. ( Pins 2 and 3)
Top
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: APX 7500 J2 connentor

Post by Jim202 »

mcmichaeldh wrote:Has anyone been able to control the APX going thru the J2 connector on the back of the radio? Using the Serial Bus. ( Pins 2 and 3)


Other than simple PTT, the APX series radios use the CAN buss for all the data control of the radio. They are not like the XTL series radios that used the SB9600 data buss.

Jim
Top
Post Reply

Return to “Radio Programming”