Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

EX600XLS OOB w/CPS 6.12.05

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

danlewis
New User
Posts: 4
Joined: Fri Jun 19, 2015 7:41 pm

EX600XLS OOB w/CPS 6.12.05

Postby danlewis » Mon Jun 22, 2015 7:44 am

I'm trying to get an EX600XLS to go down to 440 MHz. When I read the config, the radio info shows that it covers 450 to 527 MHz.

I have CPS 6.12.05 patched as follows:

rui41.dll 0x2729 changed to 83 E0 00

ProRadio.exe changed as follows:

0027e45d EB 58
0027e4c3 EB 58
002f3864 EB 58
0027e4bb EB 58

I gleaned the above from various messages in this thread on another site: http://communications.support/threads/1 ... -band-hack, but there is wrong/conflicting info in some of the posts.

I can modify the radio info to bring the lower limit to 440 MHz. I can write the config to the radio. However, when I read the config back from the radio it returns 450 MHz as the lower limit.

Looking for pointers/suggestions. What am I missing?

Thanks,

Dan

tztop10
Posts: 34
Joined: Mon Sep 29, 2014 2:08 am
What radios do you own?: HT1250 EX600XLS CDM1250 CP200

Re: EX600XLS OOB w/CPS 6.12.05

Postby tztop10 » Sat Jun 27, 2015 10:59 am

Just out of curiosity, does the radio end up reading the 440mhz frequency. if I have a low band radio 127.000 can I change it to a 46.xx frequency?

danlewis
New User
Posts: 4
Joined: Fri Jun 19, 2015 7:41 pm

Re: EX600XLS OOB w/CPS 6.12.05

Postby danlewis » Mon Jul 06, 2015 11:36 am

So I have verified that the patches above are good. What I learned is that if the config is re-read from the radio, the lower limit is reset in the software. Set it back to where you want it and you're good to go. Successfully programmed both the EX600XLS and an HT1550XLS to go down to 439 MHz.


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 9 guests