XTL series USB programming problem-video

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
asmitty0010
Posts: 413
Joined: Mon Sep 17, 2007 3:48 pm

XTL series USB programming problem-video

Post by asmitty0010 »

has anybody else encountered this? As soon as i plug in the usb cable to any usb port, radio will reset itself and keep resetting until i unplug the cable. Be advised that the XTL right below the one in question programs just fine with usb cable and doesn't reboot. About half of the xtl's i own do this when trying to use USB cable. Also be advised that using a USB-serial cable does not cause any problems - works just fine with all radios. Could this be a firmware issue? Using OEM cables.

Please see attached video link https://youtu.be/3dzN9cfOC2g

thanks
User avatar
tuckerm
Posts: 561
Joined: Thu Jun 10, 2010 12:21 pm

Re: XTL series USB programming problem-video

Post by tuckerm »

Bad cable. Had this happen to me once and a new cable fixed it.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
asmitty0010
Posts: 413
Joined: Mon Sep 17, 2007 3:48 pm

Re: XTL series USB programming problem-video

Post by asmitty0010 »

Thanks for the info!
Post Reply

Return to “Radio Programming”