Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

CDM1550 LS+ Emergency acknowledge

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

pfd radio
Posts: 127
Joined: Thu May 05, 2005 6:46 pm

CDM1550 LS+ Emergency acknowledge

Postby pfd radio » Wed Mar 28, 2018 10:32 am

I have a CDM1550 LS+ set up to decode an MDC emergency, on a conventional personality. The radio decodes the MDC Emergency, but it also sends an acknowledge packet back to the radio that sent the Emergency message. I need the radio not to send back an acknowledgement.

I think I must be missing a setting in the codeplug. Any help is appreciated.
Well... its not exactly line of sight

RFguy
Posts: 1318
Joined: Wed Dec 21, 2005 6:17 am

Re: CDM1550 LS+ Emergency acknowledge

Postby RFguy » Wed Mar 28, 2018 1:31 pm

I don't think you can do that on a CDM. If it decodes, it acknowledges. Typically only the dispatch/master radio is set to decode.

Vocoder
Posts: 5
Joined: Fri Jun 09, 2006 4:32 pm

Re: CDM1550 LS+ Emergency acknowledge

Postby Vocoder » Thu Mar 29, 2018 11:25 pm

Make the personality RX only?

pfd radio
Posts: 127
Joined: Thu May 05, 2005 6:46 pm

Re: CDM1550 LS+ Emergency acknowledge

Postby pfd radio » Fri Mar 30, 2018 9:02 am

Vocoder wrote:Make the personality RX only?


I would, but its a fireground channel and this radio is in a Chief's car. I just thought I was missing a check box in the CPS. I guess I could do emergency decode on a receive only personality and have the fireground channel auto scan.
Well... its not exactly line of sight

pfd radio
Posts: 127
Joined: Thu May 05, 2005 6:46 pm

Re: CDM1550 LS+ Emergency acknowledge

Postby pfd radio » Tue Apr 03, 2018 7:53 am

I have two of these that decode the MDC Emergency and do not acknowledge and one that sends the acknowledgement. Could this be a firmware deal?
Well... its not exactly line of sight


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 1 guest