Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

how to restore a bricked mtp700

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Posts: 1
Joined: Tue Sep 12, 2006 7:35 am

how to restore a bricked mtp700

Postby elkan » Tue Apr 17, 2018 1:51 am

Hi All,

I need some advise and help.

I have a Motorola MTP700, when i want to make a full new programming from my radio i first want to delete the programming on the radio.

I used CPS 3.1.6 and push the erase button.

After that my radio is dead. No light, no beeps, no reaction to CPS programming software.
CPS doesn't find the radio when i like to program.

I used the original Motorola serial cable and programming stand.

after looking on internet i found on ebay a seller how sold Depot CPS MR5.11 R6D.581.03
this seller say it's possible to restore the radio with that software.
I tink it isn't because mr5.11 doesn't support mtp700 i think.

I also think i need a LAP version of CPS but i can't find the right one.
I hope the LAP version have the option to push the software and codeplug to the radio without conformation is connected.

also there are people how say there is a mtp flasher tool but i don't know.

what i have:

-CPS 3.1.6
-the right z19 file
-backup from old codeplug
-right serial cable + stand for programming
-Windows 7 32bit computer

i hope to get some advise how to restore my bricked radio.

I already wanna thank you for support.

User avatar
Posts: 1039
Joined: Thu Jun 28, 2007 6:46 am
What radios do you own?: Approx. 50: Moto & Kenwood

Re: how to restore a bricked mtp700

Postby MotoFAN » Sat Jul 14, 2018 6:32 am

Erase? It's is flash erase! Why you did that? There is no codeplug erase in Motorola TETRA.

It's near impossible to restore your radio. You will need FLASH cable and kernel upstart file, and probably boot file. Two last are factory service center available only.
I am biggest fan of XTS2500 and ASTRO Digital Saber.

New User
Posts: 1
Joined: Sun Jul 08, 2012 1:03 pm

Re: how to restore a bricked mtp700

Postby alucard666 » Thu Dec 20, 2018 10:05 pm

You should check service manual. You need connect pin13 (please check pin number) of bottom connector to 12V to turn you radio in flash mode.

Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 3 guests