spectra non astro

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
kb9rre
Posts: 367
Joined: Thu Aug 22, 2002 4:28 pm

spectra non astro

Post by kb9rre »

im bored on disability. need to know what bit to use for change a9 head to a7 in bit banger. i know the location.
No greater love than this, that a man lays down his life for a friend.
kd5ual
Posts: 47
Joined: Tue Feb 15, 2005 10:28 am

Re: spectra non astro

Post by kd5ual »

change the model number from a9 to a7 on the MLM and Command board
then change ox6060 to ed
read the info on Batlabs model specific page
and good info at RBTIP
wendell
Jim202
Posts: 3609
Joined: Sun Sep 09, 2001 4:00 pm

Re: spectra non astro

Post by Jim202 »

kb9rre wrote:im bored on disability. need to know what bit to use for change a9 head to a7 in bit banger. i know the location.

Depending on which version of the programming software you have, there is a selection to get into the bit banger and go into specific addresses to change some of the features. There are some documents available that tell you what addresses to go to and what to change them to to set up the different selections.

I sent you a message with my email address to contact me and I can send you the documents with the info.

Jim
Post Reply

Return to “Radio Programming”