HT1250 AAH25KDF9AA5 & AAH25KDH9AA6 & code plug info

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
N9NU
Posts: 115
Joined: Thu Feb 19, 2004 5:38 pm
What radios do you own?: HT-1250 x 3 | CDM1550 | More..

HT1250 AAH25KDF9AA5 & AAH25KDH9AA6 & code plug info

Post by N9NU »

Hi

I have two 1250 (136-174) radios and when I read the code-plug from theAAH25KDH9AA6 model it returns with the following.

NOTE:
I refer to it here as the '6' model versus my other '5' model; the AAH25KDF9AA5


AAH25KDH9AA6 - This HAS a full keypad and 128 channels - NOT 16! - I guess it was modified somehow via hardware and/or software.

---------------------------------------------------------------------------------------
Serial: 749TLQA022
Firmware: R05.18.01

Code-plug Version: 04.01 - Latest: 04.01
Source: Factory - Latest: CPS

Programming Date:
Aug-2010 - Latest: 17-Aug-2022
Time: 00:00 - Latest: 22:12
--------------------------------------------------------------------------------------

Nothing unusual - works fine. Now here is my issue:

I saved the code-plug and wanted to upload that into the other HT1250 with the AAH25KDF9AA5 model number and it comes back with a version mismatch. Okay...I get it; however isn't there a way to work around this and allow it to accept the data from the '6' model into the '5' model ?? Is this a CPS version issue...I am using R06.12.05 - the last version which allows for 20/25KHz as well as 12.5

I know it's a codeplug and/or version issue with it. I only wish to do this as I have over 80 ARS & OEM frequencies in there and don't want to cut/paste, etc.

The one I want to dump that code-plug info to is the '6' model . Can't I just save it to disk and edit it to reflect the new one?

The OEM codeplug info for the '5' radio is:

Code-Plug Version OEM:
04.00 - Latest: 04.00 - The '6' model has the 04.01 version.

Serial:0123456789
Firmware Version:
Unknown (I programmed the latest update 05.18.01) when I got that on years ago.
This one also has the full keypad & 128 channels.



Tnx Guys

Tim Dickerson
ARS N9NU
Tim S Dickerson, DHS CEM
Amateur Radio Station:
N9NI
QTH: Woodlake Landing, Sandwich, IL
Coordinates: 041-38-18.1080N / 088-38-40.2750W
ICAO: IS65 - Pattern: Left - Altitude: 755' AGL
Runways: 18/36 Paved 2988' | 8/26 Grass 1750'
Unicom & AWOS: 122.80MHz Airport FBO: 122.750MHz
ARS: N9NU - Ex. N9KOB ARRL: VE-OES-AEC-AA
Grid: EN51 - K.A.R.C. Repeater (KA9CJN/R): 146.73 -600 100Hz PL
Sandwich OEM A/R Repeater (N9NU/R): 444.425 +5 131.8 PL
PC Gamer Tag: Reactor-Critical™
VE3TUH
Posts: 301
Joined: Fri May 24, 2002 3:14 pm
What radios do you own?: more than I should...

Re: HT1250 AAH25KDF9AA5 & AAH25KDH9AA6 & code plug info

Post by VE3TUH »

I believe you would have to use lab to reflash the model number of one of the radios to match the other one, before a clone could take place. Otherwise you are stuck cutting/pasting. Pretty sure. I know, pain in the butt.
Post Reply

Return to “Radio Programming”