I Have a GR300 that someone here programmed the M120's as a standard radio. How do I get it to work back in the repeater mode. Right now it says it has to be a 16ch radio only.
Thanks for any help Doug
Gr300 M120 How to convert to Repeater Mode
Moderator: Queue Moderator
-
Edgar
- New User
- Posts: 10
- Joined: Sat Sep 01, 2007 8:42 pm
- What radios do you own?: Motorola gm300, kenwood TKR720
Re: Gr300 M120 How to convert to Repeater Mode
By default in m120 you find COR in Pin 8, on acc connector, need no special programming, if you dont have the pinouts
make one
TX RX
pin 2 pin 11 Audio
pin 3 pin 8 COR
pin 7 pin7 GRND
if you dont have RICK you can add from pin 8 to pin 7 one 15v 33uF, or 47 uF, depennding how much hang time need,
make one
TX RX
pin 2 pin 11 Audio
pin 3 pin 8 COR
pin 7 pin7 GRND
if you dont have RICK you can add from pin 8 to pin 7 one 15v 33uF, or 47 uF, depennding how much hang time need,
-
mirage
- Posts: 169
- Joined: Mon Dec 03, 2001 4:00 pm
- What radios do you own?: APX7500APX7000 XTS4000 MT500
Re: Gr300 M120 How to convert to Repeater Mode
Ok maybe I was not the clearest the radio will not program using the GR300 software as a repeater radio so I do not have to use a rick the program prompts me to have a 16 channel radio.
Doug
Doug
Re: Gr300 M120 How to convert to Repeater Mode
Please do not post the same topic in more than one forum.
Amateurs train until they can do it right. Professionals train until they cannot do it wrong.