XTS3000 monitor button issue

[W4KRR]

My VHF and UHF XTS3000's are set up so that the top side button (the purple one) is set for "monitor". When I press the button on the VHF radio, you hear the squelch noise and the speaker icon appears. However, on the UHF radio, pressing the monitor button makes the speaker icon appear, but no squelch noise is heard. This goes for both CSQ and PL programmed channels. I assume there is some setting somewhere that is causing this, what might cause no squelch noise to be heard when the monitor button is pressed?

[akardam]

The feature is called silent monitor. Check the Monitor type under Conventional Configuration, General.

[W4KRR]

Yep, that was it, thanks for the help.