ELN6089 GM350 R3.01.09 Software

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
tby
Posts: 15
Joined: Thu Nov 03, 2005 2:57 am
What radios do you own?: GP68/340/900/2000/Visar/CPO40

ELN6089 GM350 R3.01.09 Software

Post by tby »

Could somebody confirm if there is a newer release than R3.01.09 and what version is it?
or else i'm in trouble with a set.
Thanks
Andreas
Posts: 625
Joined: Sun Sep 09, 2001 4:00 pm

Re: ELN6089 GM350 R3.01.09 Software

Post by Andreas »

This should be the latest version.

Andreas
simonp
New User
Posts: 3
Joined: Sat Jan 26, 2008 1:49 pm

Re: ELN6089 GM350 R3.01.09 Software

Post by simonp »

i have this version but get an error "radio codeplug not supported by this RSS" any ideas?

it is a GM350 model m08khf4ck3an
User avatar
tby
Posts: 15
Joined: Thu Nov 03, 2005 2:57 am
What radios do you own?: GP68/340/900/2000/Visar/CPO40

Re: ELN6089 GM350 R3.01.09 Software

Post by tby »

Yes that is the correct software for a GM350, my problem was an intermittent one within the cable from rib to radio, which did not show up in a bench test, only when cable was stretched in use, I replaced cable and rj45.
Check the Batlabs site re model specifications, MO8KHF4CK3AN is listed elsewhere as a trunking radio, ELN6089 R3.01.09 software will programme GM350 model MO8KHE4AA2AN which is a HB VHF conventional radio.
fungkh
New User
Posts: 3
Joined: Mon Mar 02, 2009 5:23 pm

Re: ELN6089 GM350 R3.01.09 Software

Post by fungkh »

Hi, I also have a GM350 , using a USB to RJ45 cable, with software R3.1.9 . I could read the radio, but couldn't edit the frequencies, it says error codeplug. Very need someone to hep me.
Post Reply

Return to “Radio Programming”