Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

syntrx information needed

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

insane1.
New User
Posts: 2
Joined: Fri Dec 19, 2008 4:52 pm

syntrx information needed

Postby insane1. » Fri Dec 19, 2008 5:13 pm

hey can i use a desk mike on a syntrx but still be able to change cannels ?
syntrx mobile
and can anyone give more information...eg id this 2nd radio?
att32wba7g22ak

User avatar
txshooter
Posts: 881
Joined: Mon Apr 15, 2002 7:15 am

Re: syntrx information needed

Postby txshooter » Fri Dec 19, 2008 5:42 pm

There are some model specific charts available at http://www.batlabs.com/models.html that may give you a little basic information about this unit. And a page dedicated to this radio at http://www.batlabs.com/syntrx.html with limited information. If you have a control head / microphone similar to the one pictured below, I don't believe a desk mic will work with one of these as they were designed as a microphone / hand held control unit setup only, that was really the beauty of these units everything was controled via the HHCH, very similar to the HHCH Spectra's.
Image
This is a interesting site on the Syntrx http://www.users.bigpond.com/glenn_percy/synmod.htm

If you are looking for something you can use a desk mic with there are lots of other radios available that you could use.
Scott B.
"Never argue with seven men when you are carrying a six shooter..."

insane1.
New User
Posts: 2
Joined: Fri Dec 19, 2008 4:52 pm

Re: syntrx information needed

Postby insane1. » Sat Dec 20, 2008 5:47 am

hmm
thanks for the answer...thought that may have been the answer but wasnt sure
but would it be possible to use a normal desk mike but use the ch display+changer?
maybe a big mod ...know of it being done before?
thanks
robert

User avatar
txshooter
Posts: 881
Joined: Mon Apr 15, 2002 7:15 am

Re: syntrx information needed

Postby txshooter » Sat Dec 20, 2008 9:00 am

You can try to mod it if you want, all you need is the service manuel with the pinouts for the microphone and the pinouts for the desk microphone you want to use. Best of luck.

If I were you I would buy another inexpensive radio that can easily accept a desk microphone and use the unit you have for a mobile installation.
Scott B.

"Never argue with seven men when you are carrying a six shooter..."


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 1 guest