Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

MTX900 (Genesis) any thing new?

This forum is for the discussions targeted at converting various models of Motorola equipment to operate in the 900MHz Amateur Band.

Moderator: Queue Moderator

New User
Posts: 3
Joined: Thu Oct 10, 2013 9:05 am
What radios do you own?: Many motorolas

MTX900 (Genesis) any thing new?

Postby thesupercroc » Thu Oct 10, 2013 10:09 am

Greetings Batboard!

I found a couple of old school MTX900s for cheap and I know that they need to be both software and hardware mods have to be made. The article that I found used a pickstick for the hardware is there any newer / more available way ? or has every one just given up on them? It does not make much difference to me as I have other 900 MHZ radios to work with.
what to put here... ?

Posts: 10
Joined: Sat Aug 03, 2002 10:29 am

Re: MTX900 (Genesis) any thing new?

Postby recurry » Thu May 12, 2016 6:12 pm

Thought I'd reply to this very old post since I just saw it. I'm the one who created the mod you mention. The reason there is no "new/more available way" to get these radios to work on the ham bands is because the microprocessor has internal ROM that will not work onamateur band frequencies. It has an internal lookup table that takes the desired programming frequency and looks up the values to program the VCO and only the values for commercial frequencies are present. Since you can't reprogram a factory ROM device and change the lookup table you are stuck. You can mod the programming software to TRY to program the radio and the radio will take it but it will still be be in the commercial band.

So, since the radios microprocessor cannot be re-programmed the solution was to translate the VCO info it puts out to frequency in the ham bands which is what the Pikstick and firmware does. There really isn't any other way to do it unfortunately. Anyway, the MTX900 makes a good, robust HT for the hambands but, of course there are easier, more modern solutions. If you want to have some fun with it, PICStics are still available from MicroMint, Inc. for a few bucks however any 16F84 or 16C84 based board will work as long as it's small enough to fit inside the case of the MTX-900 and PIC programmers are widely available and dirt cheap.

Ron Curry
N6QL (Formerly KE6WED)
R. Curry

Return to “Converting Motorola Equipment to 900MHz Amateur”

Who is online

Users browsing this forum: No registered users and 1 guest