OK forgive me but I am new to DMR.
For a repeater amp on UHF will an amp
From a analog repeater work. I have a XPR 8300
and would like to have it at a 100w. I have a Henry
from my analog repeater here on the shelf can I use it.
If not any recommendation.
Thanks
Doug
what amp to use
Moderator: Queue Moderator
-
- Posts: 8
- Joined: Sun Mar 14, 2004 9:52 am
Re: what amp to use
The XPR8300 repeater always transmits on both time slots when keyed, so any amp that works with analog will work fine.
Dr.
Dr.
- mirage
- Posts: 169
- Joined: Mon Dec 03, 2001 4:00 pm
- What radios do you own?: APX7500APX7000 XTS4000 MT500
Re: what amp to use
Thanks I will try it.
Doug
Doug
Re: what amp to use
I had tested 20 years old Andrew Bi-Directional Amplifiers in an underground project with Motorola DR3000 (XPR8300) repeater in digital mode and it worked without any problem. I also used some cheap low noise amplifiers (LNA) in head-end units with Motorola DMR repeaters in digital mode. Two slots, no problem. FYI.