mototrbo dm3601 test mode

Moderator: Queue Moderator

Post Reply
SSE5000ASTRO
Posts: 211
Joined: Wed Aug 04, 2010 7:49 pm

mototrbo dm3601 test mode

Post by SSE5000ASTRO »

I have a mototrbo dm3601 mobile radio ,how to enter test mode from front keypad? any ideas?
SSE5000ASTRO
Posts: 211
Joined: Wed Aug 04, 2010 7:49 pm

Re: mototrbo dm3601 test mode

Post by SSE5000ASTRO »

got it ! closed
RFguy
Posts: 1357
Joined: Wed Dec 21, 2005 6:17 am

Re: mototrbo dm3601 test mode

Post by RFguy »

Please feel free to share for the benefit of others.
User avatar
escomm
Queue Moderator
Posts: 5168
Joined: Fri Mar 24, 2006 8:24 pm

Re: mototrbo dm3601 test mode

Post by escomm »

Not much different from Astros

Boot radio, press the button under the PTT 5 times and you're in service mode. Host, DSP etc are dusplaued.

Press the bottom button 5 times and power ramp trigger turns on.

Press the PTT and orange button while turning on the radio and you're in bootloader mode
SSE5000ASTRO
Posts: 211
Joined: Wed Aug 04, 2010 7:49 pm

Re: mototrbo dm3601 test mode

Post by SSE5000ASTRO »

escomm wrote:Not much different from Astros

Boot radio, press the button under the PTT 5 times and you're in service mode. Host, DSP etc are dusplaued.

Press the bottom button 5 times and power ramp trigger turns on.

Press the PTT and orange button while turning on the radio and you're in bootloader mode

Hi, all you say is for portable radio ! not fit for mobile.look carefully
for mobile ,press the P2 five times in service mode.
but still not find how to manually set bootloader mode
10-4Communications
New User
Posts: 4
Joined: Tue Sep 04, 2007 4:04 am

Re: mototrbo dm3601 test mode

Post by 10-4Communications »

Hi guys! And Merry Christmas to all of you and your families.
I also found 5 times P1 turns Power Ramp ON, but no luck with bootloader. Any help with that will be much appreciated cause i have a dead DM 3601 and even if i send a memo to motodev they still have now answer. The radio became dead after the upgrade procedure came to 62% and the screen was on ***COMMIT WRITE*** and the radio rebooted. Since then there is no network connectivity from the USB and on the radio's screen a padlock appeared. I thick this is a classic case of corrupted flash, and i'm willing to find a way to re-enter to bootloader mode. Any help or ideas, anything?
Post Reply

Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”