APX and dual band

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
asmitty0010
Posts: 413
Joined: Mon Sep 17, 2007 3:48 pm

APX and dual band

Post by asmitty0010 »

Is there a difference in the primary band and secondary band of a dual band APX. I understand that both bands have to be enabled or only the primary band will work? Is this true? Does the secondary band have any limitations such as less channels or are both bands virtually identical or whats the story?

thanks.
resqguy911
Posts: 613
Joined: Sat Jun 26, 2004 3:35 pm

Re: APX and dual band

Post by resqguy911 »

This applies to the APX7000 and APX7500. Upon ordering either radio, you specify a primary band that MUST be enabled and a secondary band that does not have to be enabled unless you need it. It just needs to be physically present in the radio. That way, if circumstances change down the road you can pay for a flash upgrade and just turn it on. If your budget only allows for half of a project in one fiscal year, this is a way you can have the hardware in hand and merely bump it up when the rest of the money comes available. Lets say there is a statewide VHF system coming online in a few years, but your department needs new radios for your local 800MHz system which is already online. Why pay extra for the VHF feature set if it won't be used for years? There is no difference in the capabilities or capacity of either band.
"TDMA = digital and same great taste, half the bits"
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Re: APX and dual band

Post by Tom in D.C. »

Seems to me it would be easier if one just avoided the future reflashiing, ordered the radio with two active bands but didn't program one of those bands.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
User avatar
spectragod
Posts: 2029
Joined: Sun Dec 30, 2001 4:00 pm
What radios do you own?: FPP 6 meter XTL 5K's

Re: APX and dual band

Post by spectragod »

If you order a apx 7k in just 700/800, it has vhf already installed, just not turned on. Verified this on some radio's that were ordered that way, opened them up and guess what, both bands are present. it also only comes with a single band antenna that way too.
Kilgore: Smell that? You smell that?
Lance: What?
Kilgore: Napalm, son. Nothing in the world smells like that.
Kilgore: I love the smell of napalm in the morning. You know, one time we had a hill bombed, for 12 hours. When it was all over, I walked up. We didn't find one of 'em, not one stinkin' dink body. The smell, you know that gasoline smell, the whole hill. Smelled like... victory. Someday this war's gonna end...

____________
Revelation 6:8
N4KVE
Posts: 1647
Joined: Wed Apr 02, 2003 10:35 am
What radios do you own?: APX XTS XTL TRBO 900MHZ

Re: APX and dual band

Post by N4KVE »

So if you were to buy a UHF1/VHF 7000 & both bands were activated, would there be any difference in operating the radio if UHF, or VHF were the primary band?
resqguy911
Posts: 613
Joined: Sat Jun 26, 2004 3:35 pm

Re: APX and dual band

Post by resqguy911 »

N4KVE wrote:So if you were to buy a UHF1/VHF 7000 & both bands were activated, would there be any difference in operating the radio if UHF, or VHF were the primary band?
No. The average user wouldn't even know the difference if you don't tell them what frequency is on each channel change.
"TDMA = digital and same great taste, half the bits"
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: APX and dual band

Post by d119 »

Regardless, whatever band is the primary band or not, the radio appears to the user (and the programmer) as one radio that just happens to cover two bands. There's nothing really "split" about it. You can punch Channel 1 as 450.000 and Channel 2 as 150.000 (for a VHF/UHF2 radio as an example).
User avatar
Pj
Moderator
Posts: 5147
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: X9000 thru APX

Re: APX and dual band

Post by Pj »

Only thing I have noticed, is that CPS will see which one is the "primary" band in the radio. All that does is place the lowest freq as the default in the freq fields. IE: You hit a new Freq Option, and the default freq for that band will pop up in the field. Other than that, makes no difference.
Lowband radio. The original and non-complicated wide area interoperable communications system
Image
asmitty0010
Posts: 413
Joined: Mon Sep 17, 2007 3:48 pm

Re: APX and dual band

Post by asmitty0010 »

Question is answered! Thanks for the replies
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”