Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

XTS2500 Questions, Pelase Read??

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

User avatar
FMROB
Posts: 1001
Joined: Sun Jan 12, 2003 2:28 pm

XTS2500 Questions, Pelase Read??

Postby FMROB » Sun Feb 04, 2007 6:14 pm

A couple of different questions regarding programming of the XTS2500.

1) When the orange "emergency" button on top of the radio is pushed, the emergency activates without delay.

With the public safety speaker mic (non antenna) connected to the radio, when the orange "emergency" button is pushed, there is a 15-20 second delay to activate the radios emergency.

A) Can we change the dealy on the speaker min?
b) Also, Why doesn't the evacuation tone opearte from the speaker mic.


2) In setting up the emergency system, I noted that if you extend the polite and impolite to the max, for some reason the radio only sends the MDC ID only twice.

A) Can the radio be set to send the MDC ID at more frequent intervails?

B) Lets say that after that after radio 1 sends an emergency radio 2 recieves it, but doens't acknowledge the emergency.

radio 3 then keys up and sends an MDC ID

Radio 2 originally displayed radio 1 emergency MDC ID, but when radio 3 keys it kept radio 3 MDC ID.

Even if radio 1 re sends another emergency blurp, the MDC ID of radio 3 still displays.

We would like it to re display the radio 1 emergency MDC ID

Any Ideas.

P.S. I have had my head burried in the ware and portables for about five hours, and am most likely missing simple things.

Thanks, Rob

RocketNJ
Posts: 584
Joined: Sat Oct 13, 2001 4:00 pm

Postby RocketNJ » Sun Feb 04, 2007 7:44 pm

As far as the evac tone... The CPS states you must press PTT & Emergency to start sending it. A PTT will cancel it.

I think the short press for emergency on the RSM is set in firmware. A call to Moto may confirm this. The orange radio short press for emergency is programmable.

Have not played much with MDC ID for emergency. Do you have a control station or console that is ack'ing the emergency ID? Check mobiles to see if they are programmed for that feature.

Hope this helps.


Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”

Who is online

Users browsing this forum: No registered users and 1 guest