Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Help with a "Parts" xts3k

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

TheOCAstro
Posts: 33
Joined: Thu Feb 02, 2006 1:19 pm

Help with a "Parts" xts3k

Postby TheOCAstro » Sat Mar 17, 2007 1:30 am

Ok, I'm sure I have one of those "Nick" radios that numerous post and stickys keep refering to:

Model#: H09RDH9PW&BN

Host: 7.08.00
DSP: 8.02.02

Flash: 591008-4F1E009-9

It does have a serial number in the CPS but no stickers, My problem is it will receive our Digital channels but will not transmit on them, is there anything I can do, possibly hopefully somthing wrong with programming, can I dump this flash and just get the one I need.....anything???

RocketNJ
Posts: 584
Joined: Sat Oct 13, 2001 4:00 pm

Postby RocketNJ » Sat Mar 17, 2007 3:21 am

Most likely needs an alignment, assuming it is programmed correctly.

Bring it to a qualified shop and have them align it.

jmr061
was KB9KST
Posts: 3176
Joined: Fri Sep 14, 2001 4:00 pm

Postby jmr061 » Sat Mar 17, 2007 5:55 am

What is the letter in front of the DSP?

Jason

TheOCAstro
Posts: 33
Joined: Thu Feb 02, 2006 1:19 pm

Postby TheOCAstro » Mon Mar 19, 2007 4:53 pm

The whole readout of the DSP is: DSPN08.02.02

MattSR
Posts: 770
Joined: Mon Apr 21, 2003 10:00 pm

Postby MattSR » Mon Mar 19, 2007 6:04 pm

What is the TX type set to? ASTRO?

TheOCAstro
Posts: 33
Joined: Thu Feb 02, 2006 1:19 pm

Postby TheOCAstro » Tue Mar 20, 2007 12:32 am

Yes, it is set to Astro

User avatar
Pj
Moderator
Posts: 5144
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: X9000 thru APX

Postby Pj » Tue Mar 20, 2007 5:48 am

Conventional or trunked?

Do you have the right NAC if conventional?

Other than that, I would say that the radio would need to be properly aligned.
Lowband radio. The original and non-complicated wide area interoperable communications system
Image

CTAMontrose
was grem467
Posts: 1145
Joined: Mon Jul 21, 2003 12:46 pm

Postby CTAMontrose » Wed Mar 21, 2007 4:47 pm

yep.. been there done that... anytime an S-rec gets blown in, the radio should be realigned... a teeny bit off and you get wierd things on astro... not just on TX, but RX as well.

find someone with a nice Astro capable service monitor to have that puppy aligned and ill bet she will be right as rain

TheOCAstro
Posts: 33
Joined: Thu Feb 02, 2006 1:19 pm

Postby TheOCAstro » Thu Mar 22, 2007 4:03 pm

Well that worked, not sure if your supposed to do it this way but I copied an alignment from a working radio and now this radio works like a charm, again Thanks for all your help.


Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”

Who is online

Users browsing this forum: No registered users and 1 guest