Anyone know what needs to be configured for an XTS3000 to display trunking id's? I have been beating my head into a wall here and getting nowhere.
Thanks
XTS3000 Trunking ID Display
Moderator: Queue Moderator
Re: XTS3000 Trunking ID Display
What is your flashcode? IIRC you need to have digital ID to be able to display the trunking ID's. So you want your flash to start with a 5.ayaresr wrote:Anyone know what needs to be configured for an XTS3000 to display trunking id's? I have been beating my head into a wall here and getting nowhere.
Thanks
Jim
Re: XTS3000 Trunking ID Display
ya, what n7mag said, also....
under Display & Menu --> PTT ID, make sure ID Display is checked along with Scan ID Display and if needed, AnalogTrunking ID Display
under Display & Menu --> PTT ID, make sure ID Display is checked along with Scan ID Display and if needed, AnalogTrunking ID Display
Re: XTS3000 Trunking ID Display
My Flashcode is: 591008-4F1E00-9.
I thought I had all of those checked, but I will look again to be sure...thanks guys!
I thought I had all of those checked, but I will look again to be sure...thanks guys!
Re: XTS3000 Trunking ID Display
If you are trying to display analog trunking IDs you firmware must be greater than R7.22.01
-
- Posts: 214
- Joined: Sun Feb 19, 2006 9:51 pm
- What radios do you own?: To many to list here.
Re: XTS3000 Trunking ID Display
Will it work if you have the 9600buad trunking firmware in the radio. I have a XTS3000 with r06.71.00. The flashcode does have ID display in it.
Re: XTS3000 Trunking ID Display
50/50, but my guess is most likely not.
Lowband radio. The original and non-complicated wide area interoperable communications system