XTS 3000 LCD Display Problem

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
cgroftmc
Posts: 89
Joined: Thu Oct 18, 2001 4:00 pm

XTS 3000 LCD Display Problem

Post by cgroftmc »

Installed a DES-OFB board into a XTS 3000 today. After I re-assembled the radio the display was not functioning. I rechecked the LCD and flex. It looks fine. I have done this before with no problems. The LCD flashes upon power up but then does not display anything. The backlight works. Any suggestions?? Thanks!!

Craig
cgroftmc
Posts: 89
Joined: Thu Oct 18, 2001 4:00 pm

Re: XTS 3000 LCD Display Problem

Post by cgroftmc »

Just got it working. The flex was not seated properly.
Hightower
Posts: 976
Joined: Mon Sep 24, 2001 4:00 pm

Re: XTS 3000 LCD Display Problem

Post by Hightower »

cgroftmc wrote:Just got it working. The flex was not seated properly.
Thanks for reporting back....

Glad ya fixed it
cgroftmc
Posts: 89
Joined: Thu Oct 18, 2001 4:00 pm

Re: XTS 3000 LCD Display Problem

Post by cgroftmc »

No prob, me too!!
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”