S1347D Power Supply Zener Diode

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
User avatar
ka1nvz
New User
Posts: 15
Joined: Mon Aug 11, 2008 3:24 pm

S1347D Power Supply Zener Diode

Post by ka1nvz »

Does anyone have a S1347D variable DC power supply? If so can they please tell me what is the voltage stamped on the Dialco indicator just to the left of the DC On / Standby switch? The one I have is marked 28 volts. Better yet can anyone that might have a schematic please tell me what is the voltage of the zener diode that is part of the M9763 transistor circuit? I believe part of this drives the front panel DC circuit. The zener I have is blwon and is marked 56C 36 and I assumed this was a 36 volt zener but now I am not sure.


Thanks
-Tom
Thank You
Tom Elmore / KA1NVZ
Anchorage, Ak
User avatar
xmo
Moderator
Posts: 2549
Joined: Fri Oct 12, 2001 4:00 pm

Re: S1347D Power Supply Zener Diode

Post by xmo »

48-82256C36 is a 28V Zener diode
Post Reply

Return to “Test Equipment & RF Equipment Alignment”