Motorola R2024D

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
ve3lau
Posts: 23
Joined: Mon Jun 06, 2005 4:17 pm

Motorola R2024D

Post by ve3lau »

recently purchased R2024 at local flea market

RF Scan control on front panel does not work

since i do not have service manual any help on which module should i look for trouble? possible resetting unit?

Thanks
Top
DJP126
Posts: 873
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: Motorola R2024D

Post by DJP126 »

Most likely your problem is with the "pot" itself. IF you want to try to reset the software, enter special function 79. Special functions are entered by pressing both arrow keys on the keypad at the same time and then the number wanted.
Dave
Top
radio_05
Posts: 33
Joined: Tue May 02, 2006 2:09 pm

Re: Motorola R2024D

Post by radio_05 »

I have problems with my 2200B's pots, many are noisy due to dirt. Expecting it isn't a sealed pot, did you attempt cleaning with contact cleaner?
Top
DJP126
Posts: 873
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: Motorola R2024D

Post by DJP126 »

radio_05 wrote:I have problems with my 2200B's pots, many are noisy due to dirt. Expecting it isn't a sealed pot, did you attempt cleaning with contact cleaner?
We used contact cleaner on them all the time followed by compressed air.
Dave
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”