Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

XTS3000 SmartNet/SmartZone Type II Question

Moderator: Queue Moderator

New User
Posts: 1
Joined: Sat Jul 09, 2016 11:07 am
What radios do you own?: XTS3000 I, II, III

XTS3000 SmartNet/SmartZone Type II Question

Postby AConley » Wed Aug 03, 2016 10:48 am

Before I dive into the post: Bought this from the County when they had a public auction - they decided to upgrade to XTS5000's

I programmed this via ASTRO CPS w/ the system key input all my talkgroups and conventional channels. Set the radio to Affiliate "On PTT" w/ scanlists, hidden talkgroups etc.

The system I am talking about is a Motorola Type II SmartZone system. I set the radio to the coverage type of WAC AMSS and input some of the control channels from RR's list of sites. My issue is that when I go to any of the conventional channels that are programmed w/ the trunking scanlist and someone transmits over the TG, it is just static. I created Zone 2 and tried a normal 800Mhz conventional channel that I can receive on my MT2000 and it worked perfectly fine.

Current FlashPort Code: 5400080000007

I do know that this radio will work when affiliated on the County's RCS since it was bought from Big /\/\ directly by the County.

User avatar
Posts: 1287
Joined: Tue Dec 10, 2002 10:46 am

Re: XTS3000 SmartNet/SmartZone Type II Question

Postby Wowbagger » Thu Aug 04, 2016 3:21 am

It sounds like it is an ASTRO-25 system. That is a Motorola bastardization of APCO-25, using a Smartnet control channel but using P25 CAI on the voice channel. But since it ISN'T APCO-25, they use a different manufacturer ID on the P25 voice frames. It could be that since you have programmed the channel as conventional, the radio is not switching from analog to digital and/or is not decoding the non-standard voice frames.

Have you tried setting the channel to P25 CAI?
This is my opinion, not Aeroflex's.

I WILL NOT give you proprietary information. I make too much money to jeopardize my job.

I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.

New User
Posts: 1
Joined: Sun Apr 24, 2016 12:24 pm

Re: XTS3000 SmartNet/SmartZone Type II Question

Postby marcotor » Mon Aug 08, 2016 2:54 pm

Set the coverage type to disabled, and forget about hidden groups. Just program it.
MAKE CERTAIN Affiliate on PTT is on, and set both positions of the concentric to Tx Inhibit.
Works fine all over SoCal - OC CCCS, SD RCS, ICIS, etc.

User avatar
Posts: 3347
Joined: Sat Jan 04, 2003 4:59 pm
What radios do you own?: XTS2500, XTS5000, and MTS2000

Re: XTS3000 SmartNet/SmartZone Type II Question

Postby MTS2000des » Thu Aug 11, 2016 9:07 am

Sounds more like a rebanded system and your radio doesn't have rebanded firmware. MTS2000s would do this with pre-rebanding firmware with the correct rebanded CCs set. When the CC directs the subscriber to a rebanded VC, the radio goes to the wrong channel.
What is the HOST version of this radio?
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.

Return to “ASTRO Series (Astro Saber, Spectra, XTS3000/3500) Subscribers”

Who is online

Users browsing this forum: No registered users and 1 guest