ADP error ?
Moderator: Queue Moderator
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
ADP error ?
Loaded a new ADP key loaded CP
try to TX to Test it says "Clear TX only" on screen ?
did i miss a check box lol
try to TX to Test it says "Clear TX only" on screen ?
did i miss a check box lol
-
- Posts: 49
- Joined: Mon Nov 11, 2002 12:27 pm
Re: ADP error ?
Is this on a trunking system? Sounds like your system manager may have set that talkgroup ID or your radio ID for clear TX only.
Cheers,
SD.
Cheers,
SD.
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
Re: ADP error ?
tried it on conventional and analog and Direct same thing
-
- Posts: 49
- Joined: Mon Nov 11, 2002 12:27 pm
Re: ADP error ?
ADP definitely won't work in analog. Only DES-XL will work in that mode.
Cheers,
SD.
Cheers,
SD.
Re: ADP error ?
ADP indeed works in analog, but it must be P25. It will not work in conventional analog.SmackDaddy wrote:ADP definitely won't work in analog. Only DES-XL will work in that mode.
Cheers,
SD.
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
Re: ADP error ?
I Still get Clear TX only no matter what
have ADP on a 2nd system works fine but no yellow LED on Enc RX like my 6000
have ADP on a 2nd system works fine but no yellow LED on Enc RX like my 6000
-
- Posts: 49
- Joined: Mon Nov 11, 2002 12:27 pm
Re: ADP error ?
By default, the LED will flash yellow on conventional secure receive only.motoapco25 wrote:have ADP on a 2nd system works fine but no yellow LED on Enc RX like my 6000
If you want to see the LED flash on secure receive in trunking mode, there is a checkbox that will enable this in the trunking system configuration I believe.
Cheers,
SD.
- N4DES
- was KS4VT
- Posts: 1233
- Joined: Thu Dec 25, 2003 7:59 am
- What radios do you own?: APX,XTS2500,XTL2500,XTL1500
Re: ADP error ?
Are the personalities set to clear only TX? That is the default.
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
Re: ADP error ?
i have all set to select
ok Bought a KVL
got the cable in today from Escomm
KVL doesn't see the radio says no target
nothing in the manual about connections
ok Bought a KVL
got the cable in today from Escomm
KVL doesn't see the radio says no target
nothing in the manual about connections
Re: ADP error ?
You don't need a KVL for ADP. You set ADP keys in the code plug. The KVL is needed for hardware encryption.
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
Re: ADP error ?
Bought a KVL for a DES-XL key but i think the 3000 is not compable with the APX is that issue
Re: ADP error ?
Is the hardware encryption enabled in CPS? They're a checkbox to do this. If it's not checked, keyloader wont recognize it. I haven't heard of a APX not being able to take a key from kvl3000.
Good luck,
Seth
Good luck,
Seth
Seth
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
Re: ADP error ?
Yep tried it on a 6k with des-xl keys a few min ago wont read or go in to keyload
- chartofmaryland
- Batboard $upporter
- Posts: 411
- Joined: Sat Dec 28, 2002 11:25 pm
- What radios do you own?: Alot
Re: ADP error ?
Is the KVL in ASN or P25
No DES-XL in P25 mode
No DES-XL in P25 mode
If the lights are out when you leave the station and then come on the second you key up, you know you have enough power.
- motoapco25
- Posts: 1147
- Joined: Wed Jan 15, 2003 2:58 pm
Re: ADP error ?
2 diff radio's 3 diff cables none will go in to keyload I give up going to ebay with it
Re: ADP error ?
If memory serves, if you have a hardware clear/secure switch set to secure, and the personality is strapped clear, you'll get exactly this behavior.