CP200XLS error SYN UNLK

Moderator: Queue Moderator

Post Reply
User avatar
arlojanis
Posts: 1016
Joined: Mon Jan 28, 2002 4:00 pm

CP200XLS error SYN UNLK

Post by arlojanis »

I have a CP200XLS VHF that display shows SYN UNLK. Yesterday, I removed circuit board for visual exam. All looked OK. After reassembly, now radio is OK. Any ideas about what is going on?
"The world runs on radio."
com501
Posts: 1079
Joined: Fri Nov 02, 2001 4:00 pm
What radios do you own?: Over 50 - All Motorola

Re: CP200XLS error SYN UNLK

Post by com501 »

The synthesizer can't lock likely because the reference oscillator crystal is not running. Chances are, impact damage or a bad solder connection in that area. IF you find a defective crystal, the radio will need alignment if replaced. Poke around in that area and see if you can get the radio to go bad again. Also look at all your shields and ground contact points.
User avatar
arlojanis
Posts: 1016
Joined: Mon Jan 28, 2002 4:00 pm

Re: CP200XLS error SYN UNLK

Post by arlojanis »

Good ideas. Thanks.
"The world runs on radio."
Post Reply

Return to “Motorola CP/CM Series Subscribers”