quantar standalone site questions.
Posted: Sun Mar 29, 2020 3:21 pm
im at my wits end with trying to get this system running.
i have 3 quantars
2 installed for this set up
epic 4 scms
ps40 hub with 10base2 media converter BNC
psc9600
i as well have epic 3's with IR firmware 20.13.xx <-- read the psc will talk to these through the thinnet but havent tried.
ive tried pretty much everything
any help would be appreciated
i have astroCSS 7.13 and 7.14 but no swdl files though.
i can talk to the repeaters and psc via ethernet
i need help all of this... before i throw the rack out the window.
first question.
how does the PSC obtain the ip address of the base stations
my ip config is as follows
192.168.1.200 ps40 hub
192.168.1.201 psc9600 C1
192.168.1.202 psc9600 C2
192.168.1.203 quantar 1
192.168.1.204 quantar 2
channel index in psc9600 are set to same as quantars individual channels.
i have 3 quantars
2 installed for this set up
epic 4 scms
ps40 hub with 10base2 media converter BNC
psc9600
i as well have epic 3's with IR firmware 20.13.xx <-- read the psc will talk to these through the thinnet but havent tried.
ive tried pretty much everything
any help would be appreciated
i have astroCSS 7.13 and 7.14 but no swdl files though.
i can talk to the repeaters and psc via ethernet
i need help all of this... before i throw the rack out the window.
first question.
how does the PSC obtain the ip address of the base stations
my ip config is as follows
192.168.1.200 ps40 hub
192.168.1.201 psc9600 C1
192.168.1.202 psc9600 C2
192.168.1.203 quantar 1
192.168.1.204 quantar 2
channel index in psc9600 are set to same as quantars individual channels.