Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

XTL dual 05 control head programming

This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.

Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.

Moderator: Queue Moderator

Posts: 3546
Joined: Sun Sep 09, 2001 4:00 pm

XTL dual 05 control head programming

Postby Jim202 » Sun Oct 09, 2016 8:26 am

XTL – Dual 05 Control Head Programming

As far as dual heads just connect the second head to either the main radio through the second blue connector, or you can daisy chain it off the blue port on the first head. In the CPS software under the "radio wide tab" select the "control head tab" then put a check mark in the "multiple control head box" in the upper left hand corner. Then under the control head style select all active. This will allow you to control all radio functions from either head, including turning a repeater on or off.

The only other thing you may need to do is change the control head ID number that is programmed in the head itself. The radio needs to see a control head 1 and a control head 2 or you will get an error if they are both the same.

To change the control head ID number shut the radio off, disconnect the head from the radio, press the "left most button under the display" and the "orange emergency button" at the same time and turn the control head on. Then rotate the channel select knob to change the control head number. Then turn off power to the head to lock the number in.

When you reconnect the head to the radio and turn the radio on, it should work as a dual head radio now.


Return to “Vehicle Radio Installs”

Who is online

Users browsing this forum: No registered users and 1 guest