vocoder switch question....

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

Post Reply
User avatar
MotoTech
Posts: 89
Joined: Fri Oct 10, 2003 12:58 pm

vocoder switch question....

Post by MotoTech »

I just switched vocoders on my xts3000's 800 host 7.5 dspn 7.3.19
To nick radio witch had host 5.51 dsp 6.4, Now I thought the host and dsp would transfer to the other radio, the dsp switched but the host info did not any suggestions
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

It was my understanding the HOST firmware was on the controller board, not the vocon. Switch the controller board as well, force in a good codeplug with some form of LAB software & it should be done.

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
User avatar
MotoTech
Posts: 89
Joined: Fri Oct 10, 2003 12:58 pm

vocoder

Post by MotoTech »

Thanks, I figured i hd to switch the controller after i posted the message, all done works great. I just hope there are no problems with the host/dsp..... host 7.05.00 dspn 7.03.19. now only if i can get rid of the nick flash... is the next step.
Top
Post Reply

Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”